Call 08046035782 71% Response Rate

our range

V-Blocks

V-Blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection purposes such as marking accurate Centers, checking Concentricity, Parallelism, etc.

Salient Features:

  • Cast Iron Universal V-Blocks, Cast Iron Plain V-Blocks and Cast Iron Elongated V-Blocks are made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210, offered duly hand-scrapped finish.
  • Universal V-Blocks & Elongated V-Blocks are generally conforming to IS-4960-1968 and Plain V-blocks are  V-blocks are  switch. Magnetic V-Blocks are offered in two types i.e. soft 
  • Steel V-Blocks are made from hardened & ground alloy steel having  hardness  55 - 60  HRC  generally  conforming  to IS 2949- 1992 available in different Grades of accuracies. i.e. Grade-0, Grade-1 and Grade-2 accuracy limits, having included Angle 90º± 5'
Granite V-Block

Granite V-Block

Rs 8,000  / pairGet Best Price
MaterialGranite
ColorBlack
BrandMicro Flat
Weight50 mm
Country of OriginMade in India
Length63 mm
Height50 mm
Clamping Range50 mm

Salient Feature:

  • Cast Iron Universal V-Blocks, Cast Iron Plain V-Blocks and Cast Iron Elongated V-Blocks are made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210, offered duly hand-scrapped finish. Universal V-Blocks and Elongated V-Blocks are generally conforming to IS-4960-68 and Plain V-blocks are generally conforming to IS-2949-1974.
  • Steel V-Blocks are made from hardened and ground alloy steel having hardness 55-60 HRC generally conforming to IS-2949-1992 available in different Grades of accuracies i.e. Grade-0, Grade-1 and Grade-2 accuracy limits, having included Angle 90º± 5’.
  • Magnetic V-Block has a total 3 Magnetic surfaces. Top and bottom with 90º V-Angle and end surface opposite to switch. Magnetic V-Blocks are offered in two types i.e. soft and hardened.
  • Clamps offered for Plain V-Blocks (Cast Iron and hardened and ground steel and Granite V-Blocks) on request.
  • Granite V-Blocks made from good quality Granite, working faces offered duly finely lapped finish having included Angle 90º± 5’.

View Complete details

get quoterequest a call back
Cast Iron Plain V-Block

Cast Iron Plain V-Block

Rs 2,500  / pairGet Best Price
MaterialCast Iron
ColorGrey
BrandMicro Flat
ShapeV Shaped
FinishFinely Lapped
Length50 mm
Height40 mm
Clamping Range5 mm

According to the needs of our clients of various kind of series connector we have brought forwards to our clients one of the most outstanding quality Cast Iron Plain V-Block which is very much efficient and reliable in its use. Cast Iron Plain V - Block is made from close grained faces offered duly finely lapped finish having included Angle Cast Iron Castings conforming to Grade FG-220 of IS-210, 90º± 5'. Offered duly hand-scrapped finish. Plain V-blocks are switch. Cast Iron Plain V - Block are generally conforming to IS-2949-1992. Cast Iron Plain V – Block are available in different grades of accuracy. Height available is 40 to 200 mm, Length available is 50 to 200 mm, Clamping Range is 5 to 200 mm.

 

Features:

  • Durable and long lasting
  • Corrosion resistant
  • Convenient to install
  • Reliable functionality

View Complete details

get quoterequest a call back
Steel V Block

Steel V Block

Rs 3,000  / pairGet Best Price
MaterialSteel
ColorSilver
BrandMicro Flat
Length50 mm
Height40 mm
Clamping Range3 mm
Pull Capacity25 Kg
Flatness5micron
Squareness5micron
Parelleness5micron

V-Blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection purposes such as marking accurate Centers, checking Concentricity, Parallelism, etc.


Salient Feature:
  • Cast Iron Universal V-Blocks, Cast Iron Plain V-Blocks and Cast Iron Elongated V-Blocks are made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210, offered duly hand-scrapped finish. Universal V-Blocks and Elongated V-Blocks are generally conforming to IS-4960-68 and Plain V-blocks are generally conforming to IS-2949-1974.
  • Steel V-Blocks are made from hardened and ground alloy steel having hardness 55-60 HRC generally conforming to IS-2949-1992 available in different Grades of accuracies i.e. Grade-0, Grade-1 and Grade-2 accuracy limits, having included Angle 90º± 5’.
  • Magnetic V-Block has a total 3 Magnetic surfaces. Top and bottom with 90º V-Angle and end surface opposite to switch. Magnetic V-Blocks are offered in two types i.e. soft and hardened.
  • Clamps offered for Plain V-Blocks (Cast Iron and hardened and ground steel and Granite V-Blocks) on request.
  • Granite V-Blocks made from good quality Granite, working faces offered duly finely lapped finish having included Angle 90º± 5’.
  • Height Available: 40 to 75 mm
  • Length Available: 50 to 300 mm

View Complete details

get quoterequest a call back
Universal  V Block

Universal V Block

Rs 7,000  / pairGet Best Price
MaterialCast Iron
Usage/ApplicationUsed for Tooling and Inspection purpose
BrandMicro Flat
Angle90 Degree
Min Clamping Range5 mm
Length50 mm
Height40 mm

V-Blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection purposes such as marking accurate Centers, checking Concentricity, Parallelism, etc.


Salient Feature:

  • Cast Iron Universal V-Blocks, Cast Iron Plain V-Blocks and Cast Iron Elongated V-Blocks are made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210, offered duly hand-scrapped finish. Universal V-Blocks and Elongated V-Blocks are generally conforming to IS-4960-68 and Plain V-blocks are generally conforming to IS-2949-1974.
  • Height available: 40 mm to 300 mm
  • Length available: 50 mm to 300 mm
  • Min Clamping Range available: 5 mm to 300 mm

View Complete details

get quoterequest a call back
Magnetic V Blocks

Magnetic V Blocks

Rs 4,500  / pairGet Best Price
Usage/ApplicationTooling and Inspection
BrandMicroflat
MaterialStainless Steel
ShapeV Shaped
Size40 x 40 to 125 x 200
Country of OriginMade in India
V-Blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection purposes such as marking accurate Centers, checking Concentricity, Parallelism, etc

Magnetic V-Block has a total 3 Magnetic surfaces. Top and bottom with 90º V-Angle and end surface opposite to switch. Magnetic V-Blocks are offered in two types i.e. soft and hardened.

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES